The metal conditioner of this qualification requirement provides the following features:

a. forms a chemical barrier which reduces friction, corrosion, and rust;

b. assists in neutralization of acids formed as products of combustion;

c. provides protection over high heat ranges resulting in reduced energy consumption;

d. provides for continued operation of mechanical parts of internal combustion engines,gearboxes, and shaft bearings even after the primary lubricant is removed;

e. does not-change viscosity of the primary lubricant;

f. reduces "dry" start-ups by forming a molecular bond on all metal surfaces of mechanical equipment;

g. and does not allow material build-up on the metal surfaces which would change the tolerances on finely machined parts.

Delaying the qualification of the Militec-1 Metal Conditioner severely impairs the ability of essential mechanical equipments such as compressors, pumps, combustion engines, gearboxes, and shaft bearings (excluding gas turbines) to survive and continue to operate in the event of emergencies where there is a loss, contamination or non-existence of the primary lubricant.

5. Certification

The Militec-1 Metal Conditioner provided by the supplier listed in section 2 above is a material that meets the Navy's qualification requirements and is certified and approved for immediate use by all commands having available discretionary funds. Militec should be used in accordance with the manufacturer's instructions and Material Safety Data Sheet.

Other qualified sources are continuing to be sought.

I hereby certify that the facts and representations which are included in this qualification requirement, certification and approval and which form a basis for this action are accurate to the best of my knowledge.

JOSEPH K. TAUSSIG, JR. DATE:

Assistant Deputy Under Secretary

of the Navy (Safety & Survivability)